For V(x)=10−50x (volts, with x in metres), determine the magnitude and direction of the electric field.
- 10 N/C along +x
- 10 N/C along −x
- 50 N/C along +x
- 50 N/C along −x
CBSE · Class 12 Physics · Chapter 2
Chapter-wise board questions and sample-paper practice.
82 questions · 9 topics. Attempt each question before opening its available answer or diagram check.
Class 12 Physics · Chapter 2 · 82 questions · pyqhub.org
No questions match. Try another term or reset the filters.
For V(x)=10−50x (volts, with x in metres), determine the magnitude and direction of the electric field.
The field along the x-axis is Eₓ=4x N/C. Find V(A)−V(B), with A at x=1 m and B at x=3 m.
Given V(x,y)=x²−2y² in volts (coordinates in metres), find the angle that the electric field at (2 m,1 m) makes with the positive x-axis.
Two distant conducting spheres of radii r₁ and r₂ are joined by a wire. Work out the ratio of their surface electric-field magnitudes E₁/E₂ in electrostatic equilibrium.
Two isolated conducting spheres of radii r₁ and r₂, carrying charges q₁ and q₂, are kept far apart and joined by a thin conducting wire. Neglect the wire capacitance and mutual electrostatic influence. Identify the incorrect assertion about their final equilibrium state.
Fixed charges +Q and −2Q are separated in space. R and S are two distinct points, each at distance d from each fixed charge. How much work is required to carry a test charge −Q from R to S?
A dipole has charges +1 μC and −1 μC separated by 10 cm. In a 100 N/C uniform field, calculate the work needed to rotate it from stable alignment to unstable alignment.
An isolated 12.0 μF capacitor initially at 150 V is connected in parallel, like plate to like plate, to an initially uncharged 6.0 μF capacitor. Find the common final voltage and the charge on each capacitor.
A dielectric-filled capacitor C is charged to V and then isolated. The dielectric is removed. Discuss separately what happens to capacitance, stored energy and the potential difference, with reasons.
An air-filled parallel-plate capacitor is charged to V and isolated. Its plate separation doubles and a material with K=1.8 fills the increased gap. Determine the ratios of new to old capacitance, electric field and stored energy.
Two parallel-plate capacitors X (air) and Y (dielectric constant 4) have identical plate areas and separations. They are in series across 6 V and their net capacitance is 4 μF. Find both capacitances and the voltage across each.
(a) Obtain C=ε₀A/d for a parallel-plate air capacitor, neglecting fringe fields. (b) Two air capacitors C₁ and C₂ remain connected in parallel to a DC battery while dielectric slabs of constant K are inserted in both. Explain the change in charge and stored energy of each.
(i) A graph of V against 1/r has straight lines for source charges Q₁ and Q₂ at angles +60° and −30°, respectively, to the positive horizontal axis (common scales). Infer the signs and ratio Q₁/Q₂. (ii) Point charges −2 μC at (−0.30 m,0) and +5 μC at (+0.30 m,0) are in an external field E⃗=(A/x²)î, A=9×10⁵ N m²/C. Use Vext(x)=A/x on each half-line, zero as x→−∞ or x→+∞ respectively. Find the sum of their mutual potential energy and their energy in this prescribed external potential. Do not include the energy of the sources producing the external field.
(i) Explain why an equipotential surface is perpendicular to E, why a dielectric weakens an applied electric field, and why reducing the plate gap decreases V for an isolated charged parallel-plate capacitor. (ii) Charges q, −4q and 2q occupy an equilateral triangle of side a. Obtain the work needed to separate them completely.
A dipole of moment 4×10⁻⁹ C·m makes an angle of 30° with a uniform field of strength 5×10⁴ N/C. Find its electrostatic potential energy.
A 3 μF capacitor and a 6 μF capacitor are connected in series. Find their equivalent capacitance (from a board case-based question).
Three charges 2q, −2q and q occupy the three corners of an equilateral triangle of side ℓ. Find the system’s electrostatic potential energy.
Charges +q, −2q and +q lie along the x-axis at −1 m, 0 m and +2 m. Express the potential energy of this three-charge system in terms of q and ε₀.
A +5 μC charge is at (1 cm,1 cm). Calculate the work performed by an external agent in bringing +6 μC from infinity to (−3 cm,4 cm).
Sketch the electric-field lines together with equipotential curves for two equal positive charges. Explain whether the field magnitude must be the same at all points on any given equipotential.
Draw representative field lines and equipotential curves around two equal and opposite point charges. Explain why the electric-field vector meets each equipotential at right angles. Identify the plane of zero potential and justify it using the two charge contributions.
A uniform field E=E₀î fills a region. Sketch three equipotential planes. Two charges −q and +q are placed at (−a,0,0) and (+a,0,0). Taking only the potential due to these two charges, with zero at infinity, find the far-field potential at (x,0,0) when x≫a.
A particle with nonzero charge moves along x through the potential V(x) shown in the redrawn P–Q–R–S–T graph. At which marked point does it experience the greatest magnitude of electric force?
An isolated hollow conducting sphere carries nonzero net charge, with no charges in its cavity or outside it. Taking V=0 at infinity, which pair correctly gives the electric field and potential at a point in the empty cavity?
Point charges −5 μC and +2 μC are placed at (−4 cm,0) and (+6 cm,0). Find the external work necessary to separate the charges to infinity.
Equal charges Q occupy the four vertices of a square of side ℓ. What work must be done to bring a fifth charge Q from infinity to the square’s centre?
(a) Explain the physical reason that a real capacitor cannot store unlimited charge. (b) A capacitor at V is isolated and connected to an identical uncharged capacitor. Compare the final total stored energy with its initial energy.
A capacitor of area A and plate gap d is charged to voltage V; its battery is removed. The plates are pulled apart until the gap is 2d. Find the final voltage, field strength, and work needed to separate the plates.
Two equal point charges are placed at A and B, two corners of an equilateral triangle of side ℓ. Their resultant field at its third vertex P is E. A hollow conducting spherical shell of radius ℓ/4 is now centred on P. What field is present at P in the empty cavity at electrostatic equilibrium?
Horizontal capacitor plates are 1 cm apart. A particle of mass 5 mg carrying 2 nC must remain suspended between them. Calculate the required potential difference (take g≈10 m/s²).
(i) An air capacitor has plate area A, spacing d and capacitance C₀. Insert a parallel dielectric slab of thickness d/4 and constant K. Express its new capacitance. (ii) Using identical 1 μF capacitors rated at 200 V, design the smallest series-parallel network of total capacitance 2 μF suitable for a 1200 V source.
For an electric dipole ±q separated by 2a, derive approximate potentials at a far point on (i) the axial line and (ii) the perpendicular bisector.
Three equally spaced parallel conducting plates P₁, P₂ and P₃ form two dielectric-filled gaps, both of relative permittivity K=2. The central plate is at terminal A; the two outer plates are joined at B. For plate area L² and adjacent separation d, determine the capacitance between A and B.
Find the equivalent capacitance between A and B in the illustrated bridge: the four arms are 3 μF (upper left), 6 μF (upper right), 6 μF (lower left), 12 μF (lower right), with 1 μF bridging the upper and lower junctions.
A 20 μF capacitor is in series with the parallel combination of 12 μF and 8 μF, and then a 4 μF capacitor. If the left plate of the 20 μF capacitor carries −50 μC, determine the charge on the right plate of the 12 μF capacitor.
A positive test charge Q starts on the 10 V equipotential surface and is moved along four paths A, B, C and D (equipotentials at 10 V, 15 V, 20 V and 25 V). Along which path is the work done by an external agent moving the charge quasistatically maximum?
An unconnected conducting sheet of thickness smaller than the gap is pushed partway between the plates of an air capacitor. Relative to its initial capacitance C, what happens to its capacitance?
In three-dimensional space, the field is E⃗=α r⃗/r³, where r=|r⃗| and α>0. Taking zero potential at infinity, determine the magnitude of V at distance r.
A capacitor has plate area A and spacing d. In arrangement (a) a dielectric K fills half the separation across the full area; in arrangement (b) it fills half the area across the full separation. Find C in both arrangements.
Two distant metal spheres A and B have radii R and 2R and initial surface charge densities 2σ and 3σ. They are connected by a thin conducting wire. Calculate their final surface charge densities.
A parallel-plate capacitor initially has field E=V/d. Its plate separation doubles, and the applied voltage simultaneously becomes V/2. What is the resulting field?
Conducting spherical shells of radii R and 2R have the same initial surface charge density σ and are placed far apart. After they are joined by a wire, obtain their common final potential.
Charges q lie at A, B and C of an isosceles triangle with AB=AC=5L and BC=6L. Find the electrostatic potential at the midpoint of BC.
A thin conducting spherical shell of radius R carries net charge q; a charge Q is located at its centre. Determine the charge density on its outer surface and the electric potential at a distance R/2 from the centre.
A 2 μF capacitor has one plate at +25 V and the other at −25 V. Determine the electric charge on the +25 V plate.
An isolated conducting object has net charge +Q and an enclosed cavity containing a point charge +q. State the induced total charges on the cavity wall and on the exterior surface.
A dielectric with relative permittivity 4 completely fills a capacitor whose measured capacitance is C. What capacitance remains if the slab is taken out?
An isolated air capacitor initially has capacitance 20 pF and a plate gap of 1 mm; it holds charge 4 μC. Calculate the work required to widen the gap to 5 mm.
Three collinear charges lie at x=−d, 0 and +d. The two end charges are equal and nonzero and the central charge is positive Q₂. Find the sign and value of each end charge that make the total electrostatic potential energy zero.
Using the concept of work done during rotation, obtain U=−pE cosθ for an electric dipole in a uniform electric field. Explain which orientations have maximum and minimum electrostatic potential energy.
Obtain the capacitance of a parallel-plate capacitor when the whole gap is filled by a dielectric. A hollow conducting sphere of radius 0.20 m is charged with 6 μC; find the potential at its surface and at its centre.
Ten 1 μF capacitors are connected in parallel to a 100 V source. Find their total stored electrostatic energy.
A proton moves from a point at −5 V to a point at +5 V, starting and ending at rest. Calculate the work supplied externally for this transfer.
Charges −15 μC, +10 μC and +16 μC occupy (0 cm,0 cm), (0 cm,3 cm) and (4 cm,3 cm). Find the electrostatic potential energy of the arrangement.
A 100 μF capacitor is charged from a 12 V battery. Calculate its energy. After disconnecting it, join it in parallel with an uncharged 100 μF capacitor; determine the final energy of the two-capacitor system.
Three charges q, 2q and −3q are placed at the three corners of an equilateral triangle of side a. Express the total electrostatic potential energy.
Three identical 4 μF capacitors are available. Select a series-parallel arrangement that produces 6 μF equivalent capacitance.
An initially charged capacitor C carrying charge Q is connected across an initially uncharged capacitor 2C. Calculate the common final voltage and the amount of charge transferred away from the first capacitor.
Explain why a dielectric slab inserted into an isolated charged parallel-plate capacitor with fixed free plate charge (battery disconnected) reduces the net field between the plates, referring to polarisation and bound surface charges.
An electric dipole of moment 6×10⁻⁷ C·m is placed parallel to a uniform electric field of 10⁴ N/C. Find its potential energy.
Twelve identical charges, equally spaced around a ring of radius R, are used to form a symmetric system. Find the resulting electric potential and electric field at the ring centre (let each charge be q).
An initially air-filled parallel-plate capacitor has plate area A and gap d. It is filled with two dielectric layers arranged one after the other in the direction of the field: dielectric constant 2K and thickness d/3, followed by dielectric constant K and thickness 2d/3. Derive its new capacitance, ignoring fringing.
In an equilateral triangle ABC of side L, charge Q is at A, charge −q is at B, and charge +q is at C. D is the midpoint of BC. Find (i) the electrostatic potential energy of the three-charge system and (ii) the potential at D.
If electrostatic potential varies according to V=3x² volts, calculate the electric field at (1 m,0,2 m) and specify its direction.
Far from a collection of charges having a non-zero net charge, what is the approximate shape of the equipotential surfaces?
A square of side 2L has +q at the two corners of one edge and −q at the two opposite corners. Find V at the midpoint of the edge joining the positive charges.
A capacitor connected to a 200 V supply initially has capacitance 2 μF. Changing its capacitance reduces the stored energy by 0.02 J while the supply remains connected. Determine the new capacitance.
Compare two parallel-plate configurations that have the same capacitance: one fully filled with dielectric constant K, the other filled with equal-thickness layers of constants K₁ and K₂ along the plate separation. Derive K in terms of K₁ and K₂.
Four charges occupy the vertices of a square of side a. The top-left and bottom-right corners have charge Q; the other two corners carry charge q. Calculate the total electrostatic potential energy of this four-charge system by summing all six distinct pair interactions.
Can two distinct equipotential surfaces intersect? Explain. Charges −q and +q lie at (0,0,−a) and (0,0,+a); calculate the work in moving a test charge between two points on the xy-plane.
Sketch the equipotential surfaces for two identical positive charges separated by distance d. Explain how to calculate the interaction energy of two charges placed in an external field.
A charge q is at the centre of a circular arc of radius r. Find the work in moving a test charge Q along the arc between any two points.
Distinguish the behaviour of a conductor and a dielectric placed in an electrostatic field. For a charged parallel-plate capacitor, describe how capacitance changes when plate separation doubles.
Define the dielectric constant (relative permittivity) of a medium and state whether it has an SI unit.
Two unknown capacitors, joined to a 100 V battery, store 0.045 J in series and 0.25 J in parallel. Determine their individual capacitances and their charges when connected in parallel.
Three charges q₁, q₂ and q₃ are placed at the corners of a triangle with separations r₁₂, r₂₃ and r₃₁. Obtain their total electrostatic potential energy by adding the energy of each pair.
An electric dipole of length 2 cm makes 60° with a uniform electric field and experiences a torque 6√3 N·m. Its charges are ±2 nC. Find the dipole’s potential energy.
A capacitor holds 360 μC at an unknown applied voltage V. Reducing the voltage by 120 V reduces the charge to 120 μC. Find the original voltage and capacitance, and find the charge that would be stored if the original voltage were increased by 120 V.
Why is the electrostatic field within the bulk of a conductor zero in equilibrium?
A charge Q is fixed at O; points A and B lie at distances r_A and r_B, with r_A<r_B. Determine whether V_A−V_B is positive or negative when Q is positive, and when Q is negative.
Two large oppositely charged parallel sheets have surface densities +σ and −σ and are separated by d. Sketch the equipotential planes. For a particle of mass m and charge −q suspended between them, determine the required direction and magnitude of electric field.
A dielectric slab of constant K has the same area as a parallel-plate capacitor but thickness 2d/3, where d is the plate separation. Derive an expression for the capacitance after inserting the slab.