Assertion (A): If accelerated electrons are passed through a narrow slit, a diffraction pattern is observed. Reason (R): Electrons behave as both particles and waves.
Both A and R are true and R is the correct explanation of A
Both A and R are true but R is not the correct explanation of A
A is true but R is false
A is false but R is true
Check answer
Both true, and matter-wave behaviour explains diffraction of electrons through a sufficiently narrow slit. λ=h/p; diffraction is appreciable when aperture size is comparable with wavelength.
A 200 nm light beam shines on a metal photocathode. Photoelectric current vanishes when collector potential is −0.80 V. Determine the metal work function in eV.
Check answer
The stopping-potential magnitude is 0.80 V, giving K_max=0.80 eV. A 200 nm photon has energy hc/λ≈6.20 eV, so W≈5.40 eV.
A researcher illuminates two metals A and B (unknown work functions) with monochromatic radiation of various frequencies and records the stopping potentials Vₛ; the graph shows Vₛ against frequency ν for A and B.
(I) From the graph, the work functions of A and B are:
(A) ν₁ and ν₂
(B) V₁ and V₂
(C) hν₁ and hν₂
(D) hν₁/e and hν₂/e.
(II) For radiation of frequency ν > ν₂ incident on A and B, the maximum kinetic energy of the ejected electrons is:
(A) greater for A because it has a smaller work function
(B) greater for B because it has a larger work function
(C) greater for B because it has a higher threshold frequency
(D) the same for both, being independent of work function.
(III) If the intensity of the incident radiation is doubled at constant frequency:
(A) the slope of the parallel lines increases
(B) the slope decreases
(C) the threshold frequencies decrease
(D) the slope is unchanged but more electrons are emitted per second.
(IV) The threshold frequency of a metal is ν₀. Radiation of frequency 3ν₀ gives maximum KE E₁; at 6ν₀ it becomes E₂. Then E₁/E₂ equals:
(A) 1/3
(B) 1/2
(C) 2/5
(D) 3/4. OR If m is the slope of the line for metal B and e the electron charge, Planck’s constant is:
(A) me
(B) 1/(me)
(C) m/e
(D) e/m.
Check answer
(I) W_A=hν₁=eV₁ and W_B=hν₂=eV₂, where V₁,V₂ denote positive magnitudes of the negative vertical intercepts. (II) A has lower work function and larger K_max at the same ν>ν₂. (III) The slope h/e and thresholds do not change; emitted-electron rate increases in the ordinary linear regime. (IV) E₁/E₂=(3−1)/(6−1)=2/5. OR: if slope=m, h=me.
b26d2026 · 2023–24Board · Sample paperAdapted questionPhoton energy
Which colour—red, yellow, green or blue—carries the greatest energy per photon? Also identify the highest-frequency colour in the full visible spectrum.
Red
Yellow
Green
Blue
Check answer
Blue is highest among red, yellow, green and blue. Across the full visible spectrum, violet has the greatest frequency and photon energy.
Assertion: for above-threshold illumination, photoemission occurs effectively without a measurable delay. Reason: a classical continuous-wave accumulation model can predict a long waiting time at very low intensity. Evaluate the two statements and their explanatory link.
Check answer
Above threshold, emission is effectively instantaneous. The classical-wave prediction of a long accumulation time conflicts with observation; that incorrect classical prediction does not explain the instantaneous response. Both quoted statements about observation and classical prediction are true, but the latter is not its physical explanation.
Light of frequency 6.4 × 10¹⁴ Hz falls on a metal with work function 1.96 eV. Calculate (a) photon energy, (b) maximum photoelectron kinetic energy, and (c) stopping potential.
Check answer
hν≈2.647 eV; K_max=hν−W≈0.687 eV, so the stopping-potential magnitude is about 0.69 V.
Let λₑ, λₚ and λ_d be the wavelengths associated with an electron, a proton and a deuteron, all moving with the same speed. Then the correct relation between them is: Use nonrelativistic particle mechanics; where an accelerating voltage is used, the particle starts from rest and V denotes a positive voltage magnitude.
λ_d > λₚ > λₑ
λₑ > λₚ > λ_d
λₚ > λₑ > λ_d
λₑ = λₚ = λ_d
Check answer
At equal nonrelativistic speed, λ=h/(mv), so λ_e>λ_p>λ_d.
Give physical reasons for: (a) a range of photoelectron kinetic energies despite monochromatic illumination; (b) saturation current differing with light intensity; (c) photoemission ceasing beyond a metal-specific incident wavelength.
Check answer
Electrons originate at different binding energies/depths and can lose energy before escaping, giving a range of kinetic energies. At fixed above-threshold frequency, higher intensity raises photon flux and hence saturation photocurrent in the linear regime. Threshold wavelength is λ₀=hc/W; no ordinary single-photon emission occurs for λ>λ₀.
Judge whether these statements are true and causally related: (A) the reverse voltage that just makes photocurrent zero is cut-off/stopping voltage; (R) the threshold frequency is the minimum light frequency required to produce photoelectrons.
Check answer
Both definitions are true, but one does not explain the other. Stopping potential is the retarding-voltage magnitude that stops even the fastest photoelectrons; threshold frequency is the minimum light frequency for single-photon emission.
(a) Define a metal’s work function and explain how to read it from a graph of stopping potential versus frequency. (b) Find the illuminating wavelength for work function 2.4 eV and stopping potential 0.6 V.
Check answer and diagram
hν=W+eVₛ=3.0 eV, so λ≈413 nm. In a stopping-potential-versus-frequency graph W=hν₀ and the slope is h/e; the extrapolated vertical intercept is −W/e.Stopping potential versus frequency for two metals, shown only at and above thresholdνVₛAν₁Bν₂Parallel slopes h/e; threshold at Vₛ=0PYQ Hub · pyqhub.org
Two beams A and B, whose photon energies are 3.3 eV and 11.3 eV respectively, illuminate a metallic surface (work function 2.3 eV) successively. The ratio of the maximum speed of electrons emitted due to beam A to that due to beam B is:
3
9
1/3
1/9
Check answer
K₁=3.3−2.3=1.0 eV and K₂=11.3−2.3=9.0 eV. Nonrelativistically v₁/v₂=√(K₁/K₂)=1/3.
The waves associated with a moving electron and a moving proton have the same wavelength λ. It implies that they have the same:
momentum
angular momentum
speed
energy
Check answer
Equal de Broglie wavelength means equal momentum magnitude because λ=h/p. Conversely equal momentum gives equal wavelength, regardless of particle mass.
Assertion: increasing incident intensity at a fixed above-threshold frequency increases maximum photoelectron kinetic energy. Reason: at fixed incident optical power, constant quantum efficiency and full collection, photocurrent depends on wavelength through photon flux. Evaluate.
Check answer
The assertion that increasing intensity raises maximum photoelectron KE is false. For equal incident optical power, constant quantum efficiency and full collection, photocurrent can depend on frequency because photon flux=P/(hν). Without those conditions a blanket statement about its wavelength dependence is underdetermined.
A neutron of mass m has kinetic energy E, equal to the energy of a photon. Obtain an expression for λₙ/λₚ where λₙ is the neutron’s matter wavelength and λₚ is the photon wavelength. Use nonrelativistic particle mechanics; where an accelerating voltage is used, the particle starts from rest and V denotes a positive voltage magnitude.
Check answer
λ_n/λ_γ=√[E/(2mc²)] for a nonrelativistic neutron of kinetic energy E and photon of energy E. The photon has p=E/c, whereas the neutron has p=√(2mE).
The variation of the stopping potential (V₀) with the frequency (ν) of the incident radiation for four metals A, B, C and D is shown in the figure. For the same frequency of incident radiation producing photoelectrons in all metals, the kinetic energy of the photoelectrons will be maximum for metal:
A
B
C
D
νV₀0ABCDPYQ Hub · pyqhub.orgCheck answer
A gives the largest stopping potential and K_max=eVₛ at a common frequency above all four thresholds, because it has the lowest work function.
(a) State Einstein’s photoelectric equation and how Millikan’s measurements tested it. (b) Explain the existence of a minimum frequency required for emission from a given metal.
Check answer
Einstein’s equation is K_max=hν−W=eVₛ. A linear Vₛ–ν plot verifies slope h/e and yields threshold ν₀=W/h; saturation current changes with intensity while Vₛ does not at fixed frequency in the ordinary single-photon regime.
Assertion: the photoelectric effect provides evidence for the particle behaviour of light. Reason: for incident frequency above the metal threshold, photoelectric current is proportional to illumination intensity. Decide whether the reason explains the assertion.
Both A and R are true and R is the correct explanation of A
Both A and R are true but R is not the correct explanation of A
A is true but R is false
A is false but R is true
Check answer
Both stated observations are true, but photocurrent increasing with intensity alone does not establish light’s particle nature. The threshold, immediate emission and frequency dependence of maximum KE provide the distinctive photon-model evidence.
Explain photoemission using Einstein’s equation. Draw photocurrent versus collector potential for two light intensities at the same above-threshold frequency, and saturation photocurrent versus incident intensity with frequency, quantum efficiency and illuminated area fixed.
Check answer and diagram
K_max=hν−W. At fixed ν>ν₀, higher intensity increases saturation current but leaves the stopping potential unchanged in the ordinary linear regime. Saturation photocurrent is proportional to incident intensity when quantum efficiency and illuminated area are fixed.Two intensities, one frequency: same stopping potential, different saturation currentsV_A − V_CPhotocurrent0−V_slower intensityhigher intensitySame frequency. Stopping potential is unchanged; saturation current rises with intensity.PYQ Hub · pyqhub.orgSaturation photocurrent proportional to incident intensity at fixed frequencyI_satIncident intensity0PYQ Hub · pyqhub.org
State and justify the change in electron de Broglie wavelength when (i) electron speed decreases and (ii) its accelerating voltage increases.
Check answer
λ=h/(m_e v): decreasing speed increases wavelength. For acceleration from rest, λ=h/√(2m_e eV), so increasing V reduces wavelength; doubling V divides it by √2. These relations assume nonrelativistic motion.
Compare whether a classical electromagnetic-wave account and the photon account can explain experimentally observed photoelectric behaviour.
Check answer
Classical continuous-wave energy accumulation cannot explain a threshold frequency, effectively instantaneous emission even at low intensity, or K_max depending on frequency instead of intensity. The photon picture gives E=hν, immediate one-photon transfer and K_max=hν−W.
Monochromatic light of frequency ν>ν₀ illuminates a metal. Its frequency is doubled with incident optical intensity and illuminated area fixed. Assume the same quantum efficiency at both frequencies and saturation collection. Find the changes in photocurrent and maximum photoelectron KE.
Check answer
With the same optical intensity and area, doubling ν halves photon flux. Under constant quantum efficiency and saturation collection, photocurrent halves. K_max changes from hν−W to 2hν−W, so it does not simply double unless W=0. The current cannot be fixed without assumptions about quantum efficiency and collection.
Explain why photoelectrons cannot all be treated as leaving a metal with the same energy. Then predict what happens to the photocurrent and stopping voltage when the light source is brought from distance d to d/n, with other conditions fixed. Assume a point source, inverse-square illumination, unchanged frequency, fixed illuminated area, constant quantum efficiency and saturation collection.
Check answer
Emitted electrons have a spread of energies because of different initial binding and losses within the metal. For a point source with inverse-square illumination, moving from d to d/n increases incident intensity and saturation photocurrent by n², with fixed frequency, area and quantum efficiency. Maximum KE and stopping potential remain unchanged.
A cesium surface has work function 2.14 eV. Find its threshold frequency and the illuminating wavelength needed to produce a stopping potential of 0.6 V.
Check answer
ν₀=W/h≈5.17×10¹⁴ Hz. Incident photon energy W+eVₛ=2.74 eV, so λ≈452.5 nm.
State the photon momentum–wavelength relation. Compare de Broglie wavelengths of a deuteron and alpha particle accelerated from rest through the same positive voltage. Use m_d≈2m_p, q_d=e, m_α≈4m_p and q_α=2e and nonrelativistic motion. Give λ_d/λ_α.
Check answer
Photon momentum p=h/λ. For equal accelerating voltage from rest, λ∝1/√(mq). With m_d≈2m_p, q_d=e, m_α≈4m_p and q_α=2e, λ_d/λ_α=√[(4m_p)(2e)/((2m_p)e)]=2.
Decide whether increased photoelectric current at higher illumination intensity (frequency above threshold) is explained by a larger flux of energy quanta, which allows more electrons to be released.
Check answer
Both true, and the photon-flux argument explains it: at fixed frequency and quantum efficiency, more incident photons per second produce more photoelectrons per second and greater saturation current.
A photon of wavelength λ and an electron of mass m with the same de Broglie wavelength λ are compared. Show that photon energy divided by electron kinetic energy is 2λmc/h. Use nonrelativistic particle mechanics; where an accelerating voltage is used, the particle starts from rest and V denotes a positive voltage magnitude.
Check answer
At equal wavelength λ, Eγ=hc/λ and K_e=h²/(2mλ²); hence Eγ/K_e=2mcλ/h, for a nonrelativistic electron. Photon energy and electron kinetic energy must not both be written hc/λ.
Assertion: the de Broglie wavelength associated with a freely falling object decreases as time passes. Reason: the object’s momentum increases as it falls. Identify their logical relation. Use nonrelativistic particle mechanics; where an accelerating voltage is used, the particle starts from rest and V denotes a positive voltage magnitude.
Check answer
For an electron released from rest and falling freely, momentum magnitude increases and λ=h/p decreases, in the nonrelativistic approximation. Both statements are true and the momentum increase explains the wavelength decrease.
A platinum surface of work function 5.63 eV is illuminated at 1.6×10¹⁵ Hz. Calculate the minimum de Broglie wavelength of an emitted electron using nonrelativistic mechanics.
Check answer
hν≈6.617 eV, so K_max≈6.617−5.63=0.987 eV. Use the electron matter-wave formula λ=h/√(2m_eK), giving about 1.23 nm. hc/K is a photon relation and would give an incorrect answer for an electron.
Photoelectric case:
(I) Compare frequencies and emission rates for curves A, B and C. State an assumption needed to compare incident optical intensities from saturation currents.
(II) Which part of the EM spectrum can cause ordinary photoemission from zinc?
(III) Find W for threshold wavelength 500 nm.
(IV) Photons of 6 eV yield electrons with maximum KE 4 eV: find stopping-potential magnitude and W. OR define work function.
Three photoelectric current curves with finite stopping potentials and saturation plateauxV_A−V_CPhotocurrent0−Vₛ−Vₛ−Vₛ,CAB, CBCA/B: same stop; B/C: same saturation currentPYQ Hub · pyqhub.orgCheck answer
(I) A and B share a stopping potential, so ν_A=ν_B; B and C have the same saturation current, implying the same emission rate. Under a common frequency-independent quantum-efficiency assumption, ν_C>ν_B and the incident intensities obey I_C>I_B>I_A. Equal saturation currents alone do not imply equal optical intensities at different frequencies. (II) Ultraviolet radiation can produce emission from zinc. (III) W=hc/(500 nm)≈2.48 eV. (IV) Vₛ=K_max/e=4 V, whereas the work function is 6−4=2 eV. OR: work function is the minimum energy needed to remove an electron from the surface.
For a particle of mass m and charge magnitude |q| accelerated from rest through voltage magnitude V, sketch λ against 1/√V and find its slope. Use nonrelativistic mechanics.
Check answer and diagram
From rest, nonrelativistically λ=h/√(2m|q|V). A plot of λ versus 1/√V is a straight line through the origin with slope h/√(2m|q|). Larger mass or charge magnitude gives a smaller slope.Straight proportionality plot of wavelength versus inverse square root voltageλ1/√V0PYQ Hub · pyqhub.org
The metal in a photoelectric cell has W=6.35 eV.
(I) Find its photocurrent under infrared illumination at 3×10¹¹ Hz.
(II) In a separate experiment with ν>ν₀ and fixed intensity, discuss the effect of lowering collector potential from saturation towards retarding values.
(III) Sketch photocurrent versus collector potential and mark the stopping potential.
Complete photoelectric cell circuit with emitter, collector, microammeter and variable signed DC biasC: emitterA: collectorVariable DCbias: V_A−V_CμALightEvacuated cellReverse bias makes the collector negative relative to C.PYQ Hub · pyqhub.orgCheck answer and diagram
(I) hν≈0.00124 eV≪6.35 eV, so there is no single-photon emission and current is zero at every collector bias. Threshold frequency≈1.54×10¹⁵ Hz. (II) For a separate above-threshold illumination, lowering an initially collecting bias can leave current on its saturation plateau, then reduces collection in the retarding region; the current reaches zero at the stopping potential. It is not guaranteed to decrease for every small bias change. (III) Sketch the corresponding I–V curve with the correct stopping intercept and saturation plateau.Photocurrent against collector potential-VsIVA - VCsaturation0One frequency above threshold. Current is zero at the stopping potential.PYQ Hub · pyqhub.org
A metal has work function 2 eV and is illuminated at ν=1.2×10¹⁵ Hz. Calculate maximum photoelectron KE and stopping-potential magnitude. Explain the effects of increased intensity at fixed frequency and identify observations that contradict classical continuous-wave energy accumulation. Also define the work function.
Check answer
For W=2 eV and ν=1.2×10¹⁵ Hz, Eγ≈4.963 eV and K_max≈2.963 eV; stopping-potential magnitude≈2.96 V. At fixed frequency increasing intensity raises emission rate, not maximum KE, in the ordinary linear regime. Threshold and immediate emission contradict the classical accumulation model. Work function is the minimum energy required to remove an electron from the surface.