Initially equal-intensity coherent slits each produce intensity I. One is attenuated so its intensity becomes αI, 0<α<1. Determine I_max/I_min and compare fringe visibility with the equal-slit case. Also describe the appearance of the double-slit pattern in white light.
CBSE · Class 12 Physics · Chapter 10
Wave Optics PYQs
Chapter-wise board questions and sample-paper practice.
49 questions · 4 topics. Attempt each question before opening its available answer or diagram check.
Class 12 Physics · Chapter 10 · 49 questions · pyqhub.org
No questions match. Try another term or reset the filters.
Describe changes in YDSE interference when (i) the screen is moved away, (ii) the source slit is moved away and (iii) the fixed phase difference between the slit waves changes from 0 to π. Take the source slit to remain centred on the perpendicular bisector, and assume the illuminated slits remain mutually coherent.
Give a qualitative explanation of single-slit bright and dark fringes and why higher-order bright bands are much weaker.
Explain how increased slit separation can make fringes hard to observe with a finite-width source and a detector of finite spatial resolution. State the conditions for sustained interference. How does fringe width change if the wavelength becomes 1.5λ?
With 600 nm and 500 nm light, slit separation 1.0 mm and screen distance 0.60 m, find the second bright-fringe position for 500 nm and the first location where two wavelengths’ bright fringes coincide.
A 600 nm beam passes from air into water (refractive index 1.33). Determine wavelength, frequency and speed of reflected and refracted light.
How does YDSE fringe spacing change on (i) increasing slit spacing, (ii) replacing red with blue light and (iii) submerging apparatus in oil of index 1.2? Also state the effect of increasing the slit-to-screen distance.
For a general wavefront, not necessarily a sphere in a homogeneous medium, evaluate: Assertion: points on the same wavefront have the same phase. Reason: all such points must be at the same geometrical distance from the source.
Check answer
Two coherent monochromatic beams have intensities I and 4I. Determine the ratio of maximum to minimum interference intensity.
Differentiate two-slit interference from single-slit diffraction, then apply a double-slit separation equal to 100 wavelengths and screen distance 50 cm to calculate adjacent bright-fringe spacing. Draw the two ideal intensity patterns as part of the comparison.
Check diagram
A third bright band for 700 nm light occurs at a certain location. What wavelength gives a fifth bright band at that same location?
A beam changes wavelength from 600 nm in air to 400 nm in a medium. Which refractive index corresponds to this change?
In YDSE, D=1000d. The first dark fringe on either side of the central maximum is at transverse distance y=d from the centre. Using the small-angle approximation, relate λ and d.
Light of frequency 5.0 × 10¹⁴ Hz travels from air into a medium of index 1.5. Find wavelengths of reflected and transmitted rays.
Apply Huygens’ principle to reflection at a plane surface; discuss coherence and independent sodium lamps; compute an unknown λ whose fourth bright fringe coincides with the fifth bright fringe for 520 nm.
Check diagram
A Young double-slit experiment in air has fringe width 0.44 mm. Calculate the new fringe width if the apparatus is immersed in water of refractive index 4/3, with the source frequency and geometry unchanged.
Define sustained interference and specify the conditions necessary to produce it.
A monochromatic 600 nm wave passes a slit, with first diffraction minimum observed at 30°. Calculate the slit width.
In two-slit interference, two equal-intensity waves each have intensity I₀ and meet with path difference λ/8. Determine their resultant intensity.
Define coherence and explain the limitations of two separate lamps. For slit spacing 0.1 mm, screen distance 1.20 m and wavelength 600 nm, find fringe separation and its angular width in degrees.
In a YDSE pattern, maximum-to-minimum combined intensity is 25:9. Find the ratio of intensities of the two beams.
A 720 nm beam in air enters water whose refractive index is 4/3. What is the wavelength in water?
Explain why one hears a person behind a wall but cannot see them; also find the first single-slit dark-band position for λ = 750 nm, slit width 1.5 mm and distance 1.0 m.
Moving a YDSE screen 30 cm towards the slit changes fringe width by 0.09 mm. With slit spacing 2 mm, find wavelength.
State path-difference conditions for constructive and destructive interference, explain why independent sodium lamps fail to be coherent, and predict the effect of replacing green light by red.
A double-slit arrangement has slit spacing 1.5 mm and screen distance 1.5 m. With light of 600 nm and 400 nm together, find the nearest non-central position of coincident bright bands.
An interference pattern has angular fringe width 0.2° for 500 nm illumination. Find the double-slit separation.
If central YDSE intensity equals I₀, find intensity where the path difference between equal-beam waves is λ/6.
When slit-to-screen distance is much greater than the slit separation in YDSE, what is the approximate shape of observed fringes?
Consider y₁=A₁sin(ωt), y₂=A₂sin(2ωt), y₃=A₃cos(ωt), y₄=A₄sin(ωt+π/3). Which indicated pair(s) can form a sustained interference pattern? Assume the waves have the same polarisation and their stated phase relations remain fixed.
Light of 400 nm and 600 nm illuminates a single slit of width 1 mm; screen distance is 1.5 m. Determine the nearest point from the centre where minima coincide.
A double slit with spacing 0.6 mm is 1.5 m from its screen. With 440 nm and 660 nm light, find the first non-central coincident bright fringe.
Explain which of frequency and wavelength of a wave changes when it is reflected or refracted at an interface.
In an interference pattern with maximum intensity 4I and minimum intensity zero, infer the relation between individual intensities of coherent beams.
State the effect of a fixed phase difference of π between interfering beams and explain what happens if one of the slits is closed.
Identify the parameters that determine angular fringe width in the double-slit interference set-up.
Choose the phenomenon that cannot be explained by Huygens’ wavefront construction (among diffraction, refraction, reflection and origin of spectra).
Check answer
For starlight arriving at a mountaintop telescope from a distant galaxy, identify the approximately observed wavefront shape.
Check answer
Assertion: for d=0.25 mm, D=1.0 m and λ=500 nm, the fringe spacing is 2.0 mm. Reason: fringe spacing increases with slit separation and decreases with wavelength. Evaluate both statements.
Check answer
Use Huygens’ wave construction to derive Snell’s refraction law, then identify the wave-theory prediction later confirmed by experiment. Define a wavefront and distinguish it from a ray. Include constructions for refraction both into a denser medium and into a rarer medium.
Check answer and diagram
Light from a monochromatic source is incident on a single slit and the diffraction pattern is viewed on a screen; the graph shows the intensity against distance on the screen. The width of the slit is now increased, keeping the source intensity the same. Which of the graphs (A)–(D) is correct? (The original curve is shown dashed.)
Check answer
Assertion: emitting light of similar wavelength is sufficient for two sources to be coherent. Reason: mutually coherent monochromatic sources maintain a constant phase difference. Evaluate both statements.
Check answer
Diffraction occurs for which category of waves: sound, light, both, or neither?
Check answer
What accounts for rainbow-like colours seen from the surface of a compact disc?
Check answer
Two coherent waves each have intensity I and meet with a path difference of λ/4. Calculate resultant intensity.
Check answer
Distinguish a ray from a wavefront; verify refraction from a denser to a rarer medium using Huygens; find slit spacing for λ = 600 nm and angular fringe spacing 0.1°; compare interference and diffraction.
Check diagram
If the path difference in YDSE is λ/8, choose the approximate intensity ratio relative to a central bright fringe (0.80, 0.74, 0.94 or 0.85).
Assertion: dividing slit separation d and screen distance D by three leaves YDSE fringe width unchanged. Reason: fringe width is proportional to d/D. Evaluate both statements.
Check answer
A single slit is lit with light of 6000 Å; what wavelength produces a 30% reduction in angular width of the central diffraction maximum?