Class 12 Physics · Chapter 9 · 65 questions · pyqhub.org

Q0012026Board1 markLens maker and lens cuts

An equiconcave lens in air has focal length −10 cm. It is cut through its optical centre by a plane perpendicular to the principal axis into identical plano-concave halves. Find the signed focal length of either half.

  1. −20 cm
  2. −30 cm
  3. −40 cm
  4. −5 cm
Q0022025Board1 markApparent depth

A beaker is filled with water (refractive index 4/3) up to a height H. A coin is placed at its bottom. The depth of the coin, when viewed along the near-normal direction, will be: (A) H/4 (B) 3H/4 (C) H (D) 4H/3

Q0032025Board1 markApparent depth

A liquid is 30.0 cm deep, while a coin on its bottom appears 16.0 cm below the surface to a near-normal observer in air. Find the speed of light in the liquid.

  1. 1.6×10⁸ m/s
  2. 2.0×10⁸ m/s
  3. 3.0×10⁸ m/s
  4. 2.5×10⁸ m/s
Q0042024Board1 markSpherical and plane mirrors

Consider real and virtual objects. Assertion: plane and convex mirrors can never form a real image. Reason: a virtual image formed by one optical element cannot act as an object for another element that forms a real image. Evaluate both statements.

Q0052024Board1 markMicroscope

Consider the claims that a compound microscope has negative signed magnifying power and that its final image is erect relative to the initial object. Decide which claim(s) are valid.

Q0062023Board1 markSpherical and plane mirrors

For a concave mirror with focal length f, find the smallest possible separation between a real object and its real image. Consider the magnitude of the focal length; object and image may coincide spatially.

  1. 0
  2. |f|
  3. 2|f|
  4. 4|f|
Q0072023Board1 markRefraction and wavelength

A monochromatic ray in air meets a water surface. Which property remains identical in its reflected and refracted rays: energy carried, speed, frequency or wavelength?

Q0082023Board1 markRefraction and wavelength

A beam has speed 1.5 × 10⁸ m/s and wavelength 230 nm inside a medium. Determine its wavelength in air.

  1. 230 nm
  2. 345 nm
  3. 460 nm
  4. 690 nm
Q0092020Board1 markLens maker and lens cuts

A double-convex glass lens with refractive index 1.47 is immersed in a liquid. Which liquid index makes the lens optically ineffective?

  1. 1.47
  2. 1.62
  3. 1.33
  4. 1.51
Q0102020Board1 markPrism refraction

For an equilateral prism, the minimum deviation equals its prism angle. Find the prism material’s refractive index.

Q0122026Board2 marksSpherical and plane mirrors

A pencil of length 5 cm lies along the principal axis of a concave mirror (focal length 20 cm). Its nearer tip is 25 cm from the mirror. Calculate the length of its axial image.

Q0132025Board2 marksTotal internal reflection

A transparent solid cylindrical rod (refractive index 2/√3) is kept in air. A ray of light incident on its face travels along the surface of the rod, as shown in the figure. Calculate the angle θ.

Q0142025Board2 marksLens combinations

Two concave lenses A and B, each of focal length 8.0 cm, are arranged coaxially 16 cm apart as shown in the figure. An object P is placed at a distance of 4.0 cm from A. Find the position and nature of the final image formed.

Q0152024Board2 marksRefraction and wavelength

Light of frequency 5.0 × 10¹⁴ Hz passes from air into a material of refractive index 1.5. Calculate the wavelengths of the reflected and the transmitted rays.

Q0162024Board2 marksLens maker and lens cuts

A plano-convex lens of index 1.4 has focal length 16 cm. Determine the radius of curvature of its convex surface.

Q0172024Board2 marksSpherical and plane mirrors

A concave mirror has radius of curvature 40 cm and an object stands 30 cm in front of it. Find the image distance and lateral magnification.

Q0182024Board2 marksLens maker and lens cuts

A converging glass lens (n = 1.52) has focal length 15.0 cm in air. It is placed in a liquid of refractive index 1.65. Work out its new focal length and determine whether it converges or diverges.

Q0202023Board2 marksLens combinations

In the given figure, the radius of curvature of the curved face of the plano-convex and the plano-concave lens is 15 cm each. The refractive index of the material of the lenses is 1.5. Find the final position of the image formed.

Q0212020Board2 marksLens maker and lens cuts

Starting from the lens-maker relation, obtain the thin-lens equation linking focal length, image distance and object distance.

Q0222020Board2 marksSpherical and plane mirrors

An object is 20 cm from a concave mirror with radius of curvature 60 cm. Determine the image location and describe whether it is real or virtual.

Q0232019Board2 marksLens maker and lens cuts

An equiconcave lens has refractive index 1.5 and is in an external medium of index 1.4. Its power is −5 dioptres. Calculate each surface’s radius of curvature.

Q0242019Board2 marksPrism refraction

An equilateral glass prism has a refractive index 1.6 in air. Calculate the angle of minimum deviation of the prism when kept in a medium of refractive index 4√2/5.

Q0262018Board2 marksTotal internal reflection

The figure shows a ray of light falling normally on the face AB of an equilateral glass prism having refractive index 3/2, placed in water of refractive index 4/3. Will this ray suffer total internal reflection on striking the face AC? Justify your answer.

Q0272016Board2 marksPrism refraction

A ray PQ incident on the refracting face BA is refracted in the prism BAC as shown in the figure and emerges from the other refracting face AC as RS such that AQ = AR. If the angle of the prism A = 60° and the refractive index of the material of the prism is √3, calculate the angle θ. Here θ is the total deviation between the forward incident-ray direction and the emergent-ray direction.

Q0282026 · 2023 · 2019 · 2022BoardTelescopes

Draw the normal-adjustment ray arrangement of a refracting astronomical telescope and express angular magnification. Also present two reasons a reflecting telescope may be preferred. Define angular magnification and derive its normal-adjustment expression.

Check diagram
Q0292026 · 2023 · 2022Board3 marksTotal internal reflection

(a) State the two conditions under which total internal reflection occurs. (b) A transparent container contains layers of three immiscible transparent liquids A, B and C of refractive indices n, 3n/4 and 2n/3 respectively. A laser beam is incident at the interface between A and B at an angle θ as shown in the figure. Prove that the beam does not enter region C at all for sin θ ≥ 2/3. If sinθ≥3/4, reflection already occurs at A–B; otherwise consider transmission into B before testing B–C. Equality at the B–C critical condition gives a grazing ray, not propagation into C.

Q0302025Board3 marksRefraction and wavelength

Answer three linked parts: (a) how the width of an oblique parallel beam changes on entering water; (b) explain with a labelled ray path why a partly immersed straw appears bent; (c) illustrate how optical signals propagate through fibre by total internal reflection. Measure the beam width perpendicular to its rays, and take a planar air–water interface.

Check diagram
Q0322022Board3 marksRefraction at spherical surface

A point source is in air 24 cm to the left of the vertex of a concave spherical air–glass boundary. Glass (n=1.5) lies to the right, and the centre of curvature is 60 cm to the left of the vertex (R=−60 cm). Find the image position, its nature and its distance from the source.

Q0332022Board3 marksTotal internal reflection

Explain how an optical fibre confines light, name the responsible optical phenomenon, and provide two applications.

Q0342022Board3 marksLens combinations

A thin equiconvex lens of index μ₁ and a thin equiconcave lens of higher index μ₂ are cemented coaxially. Every curved surface has radius of magnitude R, and the outer medium is air. Derive the combined paraxial power and determine whether the combination converges or diverges.

Q0352022Board3 marksPrism refraction

Draw a ray traversing a prism and establish δ = i + e − A. Explain the symmetric passage giving minimum deviation.

Check diagram
Q0382022BoardAdapted questionLens maker and lens cuts

A thin biconvex glass lens has refractive index 1.5. For light travelling left to right, use R₁=+10 cm and R₂=−20 cm. Find its focal length in air and in a liquid of refractive index 1.25.

Q0392020Board3 marksMicroscope

Compare the image formation of a telescope and microscope. For a microscope with objective f = 1.25 cm, eyepiece f = 5 cm and stated magnification 30 at near point, find the objective’s object distance. Take D=25 cm, the final image at the near point, and use the actual objective lateral magnification rather than substituting a tube-length approximation.

Q0402019Board3 marksTelescopes

Draw a labelled ray diagram of an astronomical telescope in the near-point adjustment position. A giant refracting telescope at an observatory has an objective lens of focal length 15 m and an eyepiece of focal length 1.0 cm. If this telescope is used to view the Moon, find the diameter of the image of the Moon formed by the objective lens. The diameter of the Moon is 3.48 × 10⁶ m and the radius of the lunar orbit is 3.8 × 10⁸ m.

Check diagram
Q0412019Board3 marksPrism refraction

A triangular prism of refracting angle 60° is made of a transparent material of refractive index 2/√3. A ray of light is incident normally on the face KL as shown in the figure. Trace the path of the ray as it passes through the prism and calculate the angle of emergence and the angle of deviation.

Q0422018Board3 marksLens maker and lens cuts

A symmetric biconvex lens of radius of curvature R, made of glass of refractive index 1.5, is placed on a layer of liquid placed on top of a plane mirror as shown in the figure. An optical needle with its tip on the principal axis of the lens is moved along the axis until its real, inverted image coincides with the needle itself. The distance of the needle from the lens is x. On removing the liquid layer and repeating the experiment, the distance is y. Obtain the expression for the refractive index of the liquid in terms of x and y.

Q0432017Board3 marksRefraction and wavelength

First compute the change in wavelength as 589 nm light enters water (n = 1.33). Then, for a symmetric biconvex lens (n = 1.55, f = 20 cm), calculate its surface curvature radius.

Q0442017Board3 marksTelescopes

(a) Draw a ray diagram depicting the formation of the image by an astronomical telescope in normal adjustment. (b) You are given the three lenses in the table. Which two lenses will you use as the eyepiece and as the objective to construct an astronomical telescope? Give reason.

Check diagram
Q0452016Board3 marksLens combinations

(i) A screen is placed at a distance of 100 cm from an object. The image of the object is formed on the screen by a convex lens for two different locations of the lens separated by 20 cm. Calculate the focal length of the lens used. (ii) A converging lens is kept coaxially in contact with a diverging lens, both of equal focal length. What is the focal length of the combination?

Q0462026Board4 marksLens combinations

A thin convex lens forms a sharp real image of a fixed object on a screen 80 cm from the object. Its two possible positions are 20 cm apart. Calculate its focal length, the object and image distances at each position, and the corresponding lateral magnifications.

Q0472025BoardAdapted questionLens maker and lens cuts

Case study on thin lenses. (i) In the arrangement shown, a black vertical arrow and a horizontal thick line with a ball are painted on a glass plate, which serves as the object. When the plate is illuminated, its real image is formed on the screen. Which of the options (A)–(D) correctly represents the image on the screen? (ii) Which statement is incorrect? (A) For a convex mirror magnification is always negative. (B) For all virtual images formed by a mirror magnification is positive. (C) For a concave lens magnification is always positive. (D) For real and inverted images, magnification is always negative. (iii) A convex lens of focal length f is cut into two equal parts perpendicular to the principal axis. Find the focal length of each part. OR If the object in (i) is 20 cm from the lens and the screen is 50 cm from the object, find the focal length of the lens. (iv) The distance of an object from the first focal point of a biconvex lens is X₁ and the distance of the image from the second focal point is X₂. Find the focal length of the lens. For part (ii), assume real objects. In part (iii), take the lens to be symmetric biconvex. Take X₁ and X₂ in part (iv) as positive distances outside the focal points for real-object/real-image conjugates.

Q0482024Board4 marksLens maker and lens cuts

Case study on lens power. (i) A double-convex lens with each face of radius R is made of glass of refractive index n. Its power is (A) 2(n−1)/R (B) (2n−1)/R (C) (n−1)/2R (D) (2n−1)/2R. (ii) A double-convex lens of power P (equal radii) is cut into two equal parts perpendicular to its principal axis. The power of one part is (A) 2P (B) P (C) 4P (D) P/2. (iii) The two parts are kept in contact as shown in figure (iii). The power of the combination is (A) P/2 (B) P (C) 2P (D) P/4. (iv) (a) A double-convex lens of power P is cut along its principal axis and the two parts are arranged as shown in figure (iv). The power of the combination is (A) zero (B) P (C) 2P (D) P/2. OR (b) Two convex lenses of focal lengths 60 cm and 20 cm are held coaxially in contact. The power of the combination is (A) 6.6 D (B) 15 D (C) 1/15 D (D) 1/80 D.

Q0492024Board4 marksTotal internal reflection

Case study on critical angle. (i) For a ray incident at the critical angle, the angle of reflection is (A) 0° (B) < 90° (C) > 90° (D) 90°. (ii) Light of wavelength 600 nm in water (n = 4/3) is incident on the water–air interface at less than the critical angle. The wavelength of the refracted ray is (A) 400 nm (B) 450 nm (C) 600 nm (D) 800 nm. (iii) (a) In figure (iii), the incident ray PQ in the denser medium A makes 30° with the interface AB and the refracted ray is parallel to the interface. Find the refractive index of medium B with respect to medium A. OR (b) The speed of light in media A and B is 2 × 10⁸ m/s and 2.5 × 10⁸ m/s respectively. Find the critical angle for light going from A to B. (iv) Figure (iv) shows the path of a ray through a right-angled prism of refractive index n. Express θ in terms of n. In part (iv), the prism is in air, its refracting faces meet at 90°, and the emergent ray grazes the second face. θ is measured from the normal at the first face; take 1<n≤√2.

Q0502023Board4 marksTotal internal reflection

Strontium titanate (refractive index 2.41, critical angle 24.5°) is used as a diamond substitute. A ray of light is incident normally on one face of an equilateral triangular prism ABC made of strontium titanate, as shown. (a) Trace the path of the ray through the prism. (b) Find the velocity of light in the prism. (c) Briefly explain two applications of total internal reflection. OR (c) Define total internal reflection and give two conditions for it.

Q0512026Board5 marksLens combinations

(a) Using the relation for refraction at a curved spherical surface, derive the lens maker's formula. (b) Three lenses L₁, L₂ and L₃, each of focal length 40 cm, are placed coaxially. The distances between L₁ and L₂ and between L₂ and L₃ are 120 cm and 20 cm respectively. An object is kept 80 cm to the left of L₁. Find the distance of the final image from the object.

Q0522026Board5 marksSpherical and plane mirrors

(a) Draw a ray diagram to show image formation by a concave mirror when the object is between its focus and centre of curvature, and use it to derive the mirror formula. (b) A concave mirror produces a two-times magnified virtual image of an object kept 10 cm in front of it. Calculate the focal length of the mirror.

Check diagram
Q0542025Board5 marksRefraction at spherical surface

(i) Define a wavefront. Draw the incident and refracted wavefronts for a plane wave refracted by a convex lens. (ii) A beam of light from a distant source is refracted by a spherical glass ball (refractive index 1.5) of radius 15 cm. Draw the ray diagram and obtain the position of the final image.

Check diagram
Q0552025Board5 marksPrism refraction

(i) A thin pencil of length f/4 lies along the principal axis of a mirror of focal length f. Its image is real and enlarged and just touches the pencil. Calculate the magnification produced by the mirror. (ii) A ray is incident on face AB of a prism ABC at 45°; it emerges from face AC and the angle of deviation is 15°. The angle of the prism is 30°. Show that the emergent ray is normal to AC and find the refractive index of the prism. In (i), f denotes the positive focal-length magnitude of a concave mirror; find the ratio of the axial image length to the pencil length.

Q0562024Board5 marksPrism refraction

(i) A ray of light passes through a triangular prism. Show graphically how the angle of deviation varies with the angle of incidence, and hence define the angle of minimum deviation. (ii) A ray incident normally on a refracting face of a prism of angle A suffers a deviation δ. Prove that n = sin(A + δ)/sin A. (iii) The refractive index of a prism is √2 and its refracting angle is 60°. Find (1) the angle of minimum deviation and (2) the angle of incidence.

Check diagram
Q0572024Board5 marksMicroscope

(i) Draw a labelled ray diagram of a compound microscope showing image formation at the least distance of distinct vision, and derive the expression for its magnifying power. (ii) A telescope consists of two lenses of focal lengths 100 cm and 5 cm. Find its magnifying power when the final image is formed at infinity.

Check diagram
Q0582023Board5 marksRefraction at spherical surface

(i) A spherical surface of radius of curvature R separates media of refractive indices n₁ and n₂. A point object at distance u in medium n₁ forms an image at distance v in medium n₂. Derive the relation between u and v. (ii) A solid glass sphere of radius 6.0 cm has a small air bubble 3.0 cm from its centre C, as shown. The refractive index of the glass is 1.5. Find the apparent position of the bubble when seen through the surface from a point E in air.

Q0592023BoardAdapted questionMicroscope

(i) Draw a labelled ray diagram showing image formation by a refracting telescope. Define its magnifying power and give two limitations of a refracting telescope compared with a reflecting telescope. (ii) The objective and eyepiece of a compound microscope have focal lengths 1.0 cm and 2.5 cm. Find the tube length for a magnification of 300. For the microscope numerical, take final image at infinity, D=25 cm and use the approximate optical tube-length formula M≈(L/fₒ)(D/fₑ); L is measured between the objective’s rear focus and the eyepiece’s front focus.

Check diagram
Q0602020Board5 marksTelescopes

(a) Draw the ray diagram of an astronomical telescope when the final image is formed at infinity. (b) An astronomical telescope has an objective of focal length 20 m and an eyepiece of focal length 1 cm. (i) Find its angular magnification. (ii) If it is used to view the Moon, find the diameter of the image formed by the objective. Diameter of the Moon = 3.5 × 10⁶ m; radius of the lunar orbit = 3.8 × 10⁸ m.

Check diagram
Q0612020Board5 marksSpherical and plane mirrors

(a) An object placed in front of a concave mirror forms a virtual image. Draw the ray diagram and hence derive the mirror equation 1/f = 1/u + 1/v. (b) An object is 30 cm in front of a plano-convex lens whose curved surface has radius of curvature 20 cm and refractive index 1.5. Find the position and nature of the image.

Check diagram
Q0622020Board5 marksLens maker and lens cuts

(a) Derive the lens maker's formula for a biconvex lens. (b) A point object is placed 12 cm from a convex lens of focal length 10 cm on its principal axis. A convex mirror is placed coaxially on the other side of the lens at 10 cm from it. If the final image coincides with the object, sketch the ray diagram and find the focal length of the convex mirror.

Check answer and diagram
(a) For a thin lens in air, refraction at the two spherical surfaces gives 1/f = (μ − 1)(1/R₁ − 1/R₂). For a biconvex lens the Cartesian convention takes R₁ positive and R₂ negative, so the two terms add. (b) For the lens, u = −12 cm and f = +10 cm, so 1/v = 1/10 − 1/12 = 1/60 and v = +60 cm. The convex mirror stands 10 cm to the right of the lens, so this image lies 50 cm behind the mirror. Rays hit the mirror normally and retrace, making the final image coincide with the object, only when that point is the centre of curvature. Thus R = 50 cm and the convex-mirror focal length is f = +R/2 = +25 cm.
Q0632019Board5 marksTotal internal reflection

(a) Under what conditions is total internal reflection observed? Obtain the relation between the critical angle and the refractive index of the medium. (b) Three lenses of focal lengths +10 cm, −10 cm and +30 cm are arranged coaxially as in the figure. Find the position of the final image formed by the combination.

Q0642018Board5 marksSpherical and plane mirrors

(a) Draw a ray diagram to show image formation when a concave mirror produces a real, inverted and magnified image of the object. (b) Obtain the mirror formula and write the expression for linear magnification. (c) Explain two advantages of a reflecting telescope over a refracting telescope.

Check diagram
Q0652017 · 2026BoardPrism refraction

Derive the effective power of two converging lenses in contact; for an equilateral prism exhibiting minimum deviation at incidence i = ¾A, determine the speed of light in the glass.

Q0662017Board2 marksRefraction and wavelength

(i) Define the refractive index of a medium. (ii) In the ray diagram shown, calculate the speed of light in the liquid of unknown refractive index.

Q0672017BoardAdapted questionLens maker and lens cuts

(a) Explain how a diverging lens behaves in a medium with a refractive index greater than its own. For normal dispersion, describe the change in its power when red light is replaced by violet light. (b) Three thin convex lenses L₁,L₂,L₃ each have focal length 30 cm. An object is 60 cm to the left of L₁. L₂ and L₃ are to its right, and the final real image is at L₃’s rear focus. Determine which inter-lens separation is fixed by these data, and explain whether both separations can be determined uniquely.

Check answer
L₁ forms an image 60 cm to its right. To provide parallel light to L₃, this image must be at L₂’s front focus, placing L₂ another 30 cm to the right: L₁L₂=90 cm. L₂L₃ is not fixed; any positive separation is compatible with the final image at L₃’s rear focus in the ideal paraxial model.
Q0682017Board5 marksPrism refraction

(a) Deduce, by drawing a suitable ray diagram, the expression for the refractive index of a triangular glass prism in terms of the angle of minimum deviation (D) and the angle of prism (A). Draw a plot showing the variation of the angle of deviation with the angle of incidence. (b) Calculate the angle of incidence when a ray incident on one face of an equilateral glass prism produces an emergent ray that just grazes along the adjacent face. The refractive index of the prism is √2.

Check diagram
Q0692026–27Sample paper1 markLens maker and lens cuts

For a convex lens with focal length 20 cm and object 30 cm away, evaluate the claim that its focal length grows on immersion in water (n = 1.33), knowing glass n = 1.5, and whether the lens-maker index-ratio rule explains it.

Check answer
Both statements are true, and the index-ratio rule explains the increase in focal length. The lens becomes weaker when its refractive index relative to the surrounding medium decreases.
Q0702026–27Sample paper3 marksTotal internal reflection

A ray inside diamond (refractive index 2.42) reaches its diamond–air boundary at 30°. Decide if it refracts out or internally reflects and explain why carefully cut diamonds exhibit brilliance.

Check answer
The critical angle is arcsin(1/2.42), about 24.4°. Since 30° exceeds it, total internal reflection occurs. Multiple total internal reflections at suitably cut facets keep light inside before it emerges, producing brilliance.
Q0712026–27Sample paper5 marksMicroscope

A compound microscope has objective focal length 2 cm and eyepiece focal length 5 cm. The object is 2.2 cm from the objective. Determine where the objective makes its image, compute microscope magnifying power at infinity (D = 25 cm), and explain the greater magnification relative to a single lens.

Check answer
Objective image distance vₒ = 22 cm. Objective magnification magnitude = 22/2.2 = 10; eyepiece factor = 25/5 = 5. Total magnifying power magnitude = 50. Two sequential magnifications are multiplied, exceeding the magnification of a single simple magnifier.
Q0722026–27Sample paper5 marksTelescopes

An astronomical refracting telescope has objective focal length 100 cm and eyepiece 5 cm. Compute magnifying power for a final image at infinity and at the 25 cm near point; explain why the lenses differ in focal length and aperture.

Check answer
Magnifying power magnitude at infinity = 100/5 = 20. At near point: (100/5)[1 + 5/25] = 24. The objective has a long focal length and wide aperture to gather light and form the intermediate image; the eyepiece has a short focal length to magnify it.

Diagram

↑